Eastern White Pine for warm interior paneling, porch ceilings, siding, boards, and trim. Estimate your coverage, pick up in Black Mountain, or send us the details for a delivery quote.
Choose the face you want for your walls or ceiling. The coverage widths below describe the visible face after installation; nominal board sizes do not measure installed coverage. These are planning dimensions, with material availability confirmed in your quote.
For other sizes or profiles, including Channel Rustic, board and batten, car siding and surfaced boards, provide a linear-foot list for pricing. S4S means surfaced on four sides; S1S2E means one face and two edges are surfaced.
Use this optional planner to convert dimensions or square footage into a material request. Choose a profile, waste allowance and any preferred or required length. For profiles without coverage dimensions, enter linear footage. We confirm availability with your quote.
We recommend 10% extra for cuts and waste. Adjust it to suit your project.
Browse the matching profiles and sizes. We will confirm availability with your quote.
Eastern White Pine product listings include #2, Premium & Btr, and Std & Btr. grades. The grade depends on the selected product and dimensions. Include the grade from your plans or the product you want to match. We will confirm the grade, dimensions, and availability with your quote.
Beaded 1 Side has a bead on the face and a V-Joint on the back. If you are unsure which profile or grade fits your project, email a photo or sketch, or describe the look you want in your quote request.
Eastern White Pine is most often chosen for paneling, ceilings, siding, boards, and trim. For a pine product intended more specifically for flooring, compare our Arkansas Yellow Pine options.
Bring the material into the installation space and allow it to acclimate before work begins. Your installer should determine the fastening method, finish, substrate preparation, and other site-specific details. Timberline supplies the boards; installation is not included.
Include your job ZIP, timing, and access or unloading notes when requesting delivery. We confirm delivery details with your quote.
Yes. You will find beaded V-Joint, Nickel Gap, smooth-face T&G, S4S, and other profiles in the catalog. Tell us what you are building and how much you need, and we will confirm the right material and availability. Pickup is at our Black Mountain, NC lumber yard.
For planning, 1x6 beaded and Nickel Gap paneling uses a 5.5-inch installed face, while 1x8 T&G uses 7.25 inches. The usable face is narrower than the nominal board size. Enter square footage to estimate coverage, then request Eastern White Pine pricing by linear foot. For other profiles, enter the linear footage you need.
Most customers choose Eastern White Pine for paneling, ceilings, siding, boards, and trim rather than a high-wear floor. If you are comparing pine flooring, take a look at our Arkansas Yellow Pine options.
You can pick up Eastern White Pine at our Black Mountain, NC lumber yard. For delivery, include the job ZIP, timing, and access details on the quote form. The planner helps estimate coverage; it does not set freight, guarantee stock, or create an order.
