With your permission, we use Google Analytics to understand how our website is used. You can request a quote and shop without allowing analytics. Privacy policy
Light golden to honey-colored Garapa for decks, porches and outdoor living spaces. Choose a board and exact lengths, plan your deck, or ask our team for help with the material list.
Garapa decking illustration. Appearance varies by board and finish.
Buying facts
Plan in square feet. Boards are priced by linear foot. Your exact lengths and piece counts determine the material ordered.
Choose the board first. Compare S4S square-edge and Pre-Grooved options, or request another size or milling.
Confirm the installation. Your installer should check fastening, spacing, drainage and finishing for the selected product and site. Hardware is separate.
Pickup or quoted delivery. Collect your order in Black Mountain, NC, or include the job ZIP for a delivery quote. Our team confirms availability and timing.
Choose your profile and board size
Start with how you want the boards to fasten. These joint illustrations explain the two deck-board profiles; open a product for its exact specifications and length prices.
Pre-Grooved
Hidden clips sit in slots milled into both long edges. Typical for a fastener-free walking surface.
S4S square edge
Square edges with a drainage gap. Face-screwed, or plugged with a Pro Plug system.
End-view joint illustrations. Not species samples, mill drawings, or project photos.
Board sizes and planning widths
These combinations come from the current deck planner. It uses the board face plus the configured gap for coverage. The gap is a planning allowance; your installer must confirm spacing for the installation.
Garapa boards supported by this planner; exact lengths and availability require confirmation.
Garapa product listings include Premium & Btr grades. The grade depends on the selected product and dimensions. Include the grade from your plans or the product you want to match. We will confirm the grade, dimensions, and availability with your quote.
Exact-length project planner
Plan your hardwood deck
Choose a species, board, installation method, and length mix. Priced combinations show a project total before checkout. Availability is confirmed before purchase.
No matching products. Change a filter or reset filters to view all products.
Prices are pre-tax and vary by exact length. Unpriced combinations can be included in a quote request. Our team confirms availability and timing.
Reading your material plan
Required LF
The planner's material requirement for your area, board coverage and waste allowance.
Ordered LF
The total length of the boards in your selected mix: each board length multiplied by its piece count.
Rounding surplus
The extra linear feet from rounding the requirement to whole boards. Cuts and the final layout still need review.
If the board run is unknown, start with the area and review a recommended mix or enter a manual mix. Enter a supported board run before choosing a run-dependent single-length plan. Recommendations do not promise continuous runs or current stock.
Prices are checked when you submit a request or proceed to checkout. Saving an estimate does not reserve its prices. Accepted quote requests keep their submitted prices. Unpriced material and delivery stay pending until confirmed.
Illustrative Garapa boards showing light golden to honey color variation.
Garapa is commonly called Brazilian Ash. Its color ranges from light golden yellow through honey and amber, creating a bright, welcoming deck or porch. Natural boards vary within a bundle, so mixing boards during installation can create a more balanced look.
Garapa is a natural fit for decks, porches, and related outdoor living projects. Compare color, profiles, and project fit with Ipe and Cumaru on the Ipe vs Cumaru vs Garapa guide.
Installation and hardware
Finish, fastening, and technical requirements follow the selected product, manufacturer, and installer documentation. Hardware is sold separately from the lumber.
Pre-Grooved boards are typically installed with hidden clips matched to the groove.
S4S square-edge boards are typically face-screwed, with an optional plug system.
Confirm clip or screw packages with the selected product rather than relying on a universal coverage rule.
Pickup is at 104 Eastside Dr, Unit 501, Black Mountain, NC. Delivery, when offered, is priced separately and confirmed after the material mix is set. The customer is responsible for a safe unloading location and access suitable for long boards.
Garapa FAQ
How do I plan a Garapa deck?
Use the Garapa deck planner to choose a profile and board size, then enter dimensions or square footage. The planner estimates coverage and a board-length mix; the preview is illustrative. Garapa is sold by linear foot. Pickup is available in Black Mountain, and delivery can be priced with the quote.
Is every listed Garapa size available right now?
Not necessarily. Product pages show the options we can offer, while exact lengths and availability are confirmed when you request pricing or place the order.
What Garapa profiles can I plan on this page?
The planner covers Pre-Grooved and S4S square-edge boards in the combinations currently configured for pricing. Other millings can be requested. Hardware is priced separately.
Can I pick up Garapa in Black Mountain?
Yes. Pickup is available at the Black Mountain yard. For delivery, include the job ZIP, timing, access, and unloading details so those costs and arrangements can be reviewed with the order.
